Panasonic AG-HPX500E - Manual (Page 82)

82
Handling setup data
C
h
ap
te
r 4 A
d
ju
st
m
en
ts a
n
d S
et
tin
g
s f
o
r R
ec
o
rd
in
g
Saving scene files and other
settings on SD memory
cards
You can save up to four scene file settings or other
settings as files on an SD memory card, and you can
also load them from the card.
• In the case of the scene files, the current settings are
automatically saved in the unit, and the saved data is
written on an SD memory card. When data has been
read from an SD memory card, the current settings
are rewritten at the same time as the data saved
inside the unit.
• The data in all the scene files, F1 to F6, is rewritten.
The following procedure shows how to save scene
files.
1
Set the unit’s POWER switch to ON.
2
Select SCENE FILE on the setting menu
CARD FUNCTIONS screen, select YES,
and press the JOG dial button.
For details on menu operation, refer to [Using
the menus] (page 116).
PUSH MENU TO RETURN
USER FILE
SD CARD FORMAT
SCENE FILE
CARD FUNCTIONS
YES
3
Select the file number (1 to 4) using the
JOG dial button.
• Press the JOG dial button again to confirm
the setting.
READ - - - -
WRITE - - - -
FILE 1 NO FILE
FILE 2 NO FILE
TITLE RELOAD - - - -
FILE SELECT
PUSH MENU TO RETURN
SCENE FILE (SD CARD)
1
FILE 3 NO FILE
FILE 4 NO FILE
4
Select WRITE using the JOG dial
button, and press the JOG dial button.
READ - - - -
WRITE
FILE 1 NO FILE
FILE 2 NO FILE
TITLE RELOAD - - - -
FILE SELECT
PUSH MENU TO RETURN
SCENE FILE (SD CARD)
1
YES
FILE 3 NO FILE
FILE 4 NO FILE
5
Press the cursor button, turn the
JOG dial button to move to YES and
again press the JOG dial button.
• In the following example, TITLE 1 is the
filename.
• When writing is completed, WRITE OK
appears.
YES
WRITE FILE 1
PUSH MENU TO RETURN
SCENE FILE (SD CARD)
PUSH DIAL
TITLE EDIT
TITLE 1
NO
To load a file
Perform steps 1 to 3, select READ in step 4, and press
the JOG dial button.
When reading is completed, READ OK appears.
Select USER FILE in the CARD FUNCTION screen
and process it in the same way as scene files.