Panasonic AG-HPX500E - Manual (Page 26)

26
C
h
ap
te
r 2 P
ar
ts a
n
d t
h
eir F
u
n
ct
io
n
s
1 Back tally lamp
When the BACK TALLY switch is set to [ON], the
lamp behaves in the same way as the front tally
lamp at the viewfinder.
2 BACK TALLY switch
This switch controls the action of the back and
rear tally lamps.
ON: Back and rear tally lamps enabled.
OFF: Back and rear tally lamps disabled.
3 WARNING lamp
This lamp starts blinking or lights up if something
unusual occurs in the memory.
4 Rear tally lamp
When the BACK TALLY switch is set on [ON], the
rear tally lamp behaves in the same way as the
back tally lamp.
5 Mode LED
Shows the camera unit mode.
CAM: Lights red in CAMERA mode.
MCR: Lights green in MCR mode.
PC: Lights orange in PC mode.
1 LCD monitor
The LCD monitor displays the video in the
viewfinder.
Alternatively, it can show clips on the P2 card in a
thumbnail format.
In thumbnail display mode, you can use the
thumbnail menu buttons, CURSOR and SET
buttons to manipulate or delete clips, or format P2
cards.
For details, refer to [Adjusting and setting the
LCD monitor] (page 75).
2 OPEN button
Used to open the LCD monitor.
Warning and Status Display
Functions LCD Monitor
1 2 3
4
2 1
5