Panasonic AG-HPX500E - Manual (Page 113)

113
Properties
C
h
ap
te
r 6 M
an
ip
u
la
tin
g C
lip
s w
ith T
h
u
m
b
n
ail
s
Properties
The clip’s properties and the P2 card’s status are
displayed.
Clip Property
Select PROPERTY → CLIP PROPERTY.
The following screen appears.
2
1
3
5
4
1 Clip number
2 Thumbnail
3 Slot number
4 Clip information
Various indicators that have been added to the
clip and also various kinds of data are displayed.
( appears if the P2 card is writeprotected)
•
CLIP NAME: Clip name
• START TC: Time code value when recording
started
• START UB: User’s bit value when recording
started
• DATE: Date when the recording was made
• TIME: Time when recording started
• DURATION: Clip length
• V_FORMAT: Video signal format
• FRAME RATE: Playback frame rate
• REC RATE: Recording frame rate
This display appears when recording using
a setting for the FRAME RATE item on the
SCENE FILE screen other than the default during
720P/24PN or 720P/30PN recording operation.
5 Clip metadata
The video and audio formats, videographer
information and other detailed data are displayed here.
The audio format is only indicated for 1 to 4CH. Use
the CURSOR button to select the item and press the
SET button. (For details on the clip metadata, see
[Setting of Clip Meta Data] (page 109).)
P2 Card Status Display
P2 Card Status Display Settings
Select PROPERTY → CARD STATUS to set the
desired indication mode (remaining free space or used
memory capacity) for the P2 card status display.
1
Press the MODE button to enter the
MCR mode.
• The thumbnail screen appears on the LCD
monitor.
2
Press the thumbnail menu button to
open the menu.
3
Select PROPERTY → PROPERTY SETUP →
P2CARD CAP.
• The following screen appears. Select the
P2 card status display settings from the P2
CARD CAP menu option.
• REMAIN:
Show remaining free space on the P2 card as
the P2 card status display.
• USED:
Show used memory capacity on the P2 card
as the P2 card status display.
<Note>
The factory setting for this function is REMAIN.