Nortel Networks 608(WL) - Manual (Page 109)

Chapter 4
Configuration via the Command Line Interface
E-DOC-CTC-20051017-0169 v0.1 107
4.2.3 Create a New Authentication Attribute
add command The ipsec peer auth add command allows adding a new authentication
attribute.
Example In the following example, a new authentication attribute is created, named secret1
The result of this operation can be verified with the list command.
[ipsec]=>
[ipsec]=>peer
[ipsec peer]=>auth
[ipsec peer auth]=>add
name = secret1
:IPSec peer auth add name=secret1
[ipsec peer auth]=>
[ipsec peer auth]=>list
[secret1]
Authtype : <unset>
[ipsec peer auth]=>