Nortel Networks 608(WL) - Manual (Page 116)

Chapter 4
Configuration via the Command Line Interface
E-DOC-CTC-20051017-0169 v0.1 114
4.3.2 List all Peer Security Descriptors
list command The ipsec peer descriptor list command shows the list of all defined
peer security descriptors.
Example The example below shows the pre-defined Peer Security Descriptors of the
SpeedTouch™:
[ipsec]=>
[ipsec]=>peer
[ipsec peer]=>descriptor
[ipsec peer descriptor]=>list
[AES_SHA1] : AES(128) SHA1 MODP1024 Lifetime 3600s
[AES_MD5] : AES(128) MD5 MODP1024 Lifetime 3600s
[3DES_SHA1] : 3DES SHA1 MODP1024 Lifetime 3600s
[3DES_MD5] : 3DES MD5 MODP1024 Lifetime 3600s
[DES_SHA1] : DES SHA1 MODP768 Lifetime 3600s
[DES_MD5] : DES MD5 MODP768 Lifetime 3600s
[AES_SHA1_Adv] : AES(256) SHA1 MODP1536 Lifetime 86400s
[ipsec peer descriptor]=>..
[ipsec peer]=>..
[ipsec]=>