Nortel Networks 608(WL) - Manual (Page 194)

Chapter 6
Advanced Features
E-DOC-CTC-20051017-0169 v0.1 192
6.6.4 Attach the xauthpool entity to the vpnserver
entity
modify the vpnserver
parameters
The :ipsec peer vpnserver modify name=serv1 xauthpool=pool1
command attaches the previously defined pool to the vpnserver, named serv1.
Example In this example pool1 is attached to vpnserver1:
The result is shown when listing the vpnserver entities:
[ipsec peer vpnserver]=>modify
name = serv1
[push_ip] = disabled
[iprange] = 10.60.11.0/24
[netmask] = 24
[primdns] = 10.60.11.200
[secdns] = 10.60.11.201
[primwins] = 10.60.11.100
[secwins] = 10.60.11.101
[domain] = clients
[xauthpool] = pool1
:ipsec peer vpnserver modify name=serv1 xauthpool=pool1
[ipsec peer vpnserver]=>
[ipsec peer vpnserver]=>list
[serv1]
Push IP : disabled
Address Range : 10.60.11.0/24
Netmask
: 255.255.255.0
Primary DNS : 10.60.11.200
Secondary DNS : 10.60.11.201
Primary WINS
: 10.60.11.100
Secondary WINS: 10.60.11.101
Domain
: clients
XAuth Pool : pool1
[ipsec peer vpnserver]=>