Nortel Networks 608(WL) - Manual (Page 152)

Chapter 4
Configuration via the Command Line Interface
E-DOC-CTC-20051017-0169 v0.1 150
4.7.7 Stop a connection
stop command The ipsec connection stop command tears down the designated Security
Association. The IKE Security Association is not stopped with this command.
Example In this example the connection, named connect1, is stopped:
The result of this operation is verified with the commands of the show command
group.
For clearing both the Phase 1 and 2 SAs, issue the “:IPSec clear session”
command.
[ipsec connection]=>
[ipsec connection]=>stop
conn = connect1
:ipsec connection stop conn=connect1
[ipsec connection]=>