Nortel Networks 608(WL) - Manual (Page 22)

Chapter 2
SpeedTouch™ IPSec terminology
E-DOC-CTC-20051017-0169 v1.0 20
2.5 Connection (Phase 2)
What is ... Bundles all the parameters required for the Phase 2 SA (IPSec) negotiation:
 Peer
Reference, pointing to the peer configuration to be used. In fact, this refers to
the IKE channel used for the Phase 2 negotiations.
 Local/remote range
Range of red IP addresses to which the IPSec policy applies.
Reference to the Network Descriptors.
 Descriptor
Reference to the Phase 2 Security Descriptor grouping the security
parameters.