Nortel Networks 608(WL) - Manual (Page 172)

Chapter 5
Troubleshooting SpeedTouch™ IPSec
E-DOC-CTC-20051017-0169 v0.1 170
5.4 Via SNMP
Debugging via SNMP
On the SpeedTouch™, several SNMP MIBs are available allowing to retrieve
configuration and counter information. A MIB (Management Information Base) can
be considered as a representation of a group of parameters.
A huge amount of MIB values can be retrieved remotely (e.g. traffic counters,
number of SAs, the Phase 1 and 2 parameters, …).
As the IPSec MIB is not standardized, a SpeedTouch™ proprietary IPSec MIB is
available on the SpeedTouch™ Setup CD-ROM.
SpeedTouch
620
SNMP
Manager
SNMP messages
...
ADSL MIB
IF MIB
IPSec MIB