Nortel Networks 608(WL) - Manual (Page 125)

Chapter 4
Configuration via the Command Line Interface
E-DOC-CTC-20051017-0169 v0.1 123
4.4.2 List all peer entities
list command The ipsec peer list command shows the list of all defined peer entities.
Example In the following example, a list of all defined peer entities is created.
[ipsec]=>
[ipsec]=>peer
[ipsec peer]=>list
[peer1]
Remote Address : 200.200.0.1
Backup Remote Address: <unset>
Physical IF
: DIALUP_PPPOE
Exchange Mode : main
Local Identifier : (addr)100.100.0.1
Remote Identifier : (addr)200.200.0.1
Descriptors : AES_MD5
Authentication : secret1
Client/Server : <unset>
Options : <unset>
[ipsec peer]=>
By default, the SpeedTouch™ device does not contain any peer entities. As
a consequence the
list command will return an empty list on new
devices.