Nortel Networks 608(WL) - Manual (Page 43)

Chapter 3
Configuration via Local Pages
E-DOC-CTC-20051017-0169 v0.1 41
Main Mode initial page When you click Main Mode, the following page is displayed:
By clicking a button, the page layout changes, revealing other fields and buttons.
More information about the various fields and buttons is found below.
Buttons You can use one of the following buttons:
IKE Security
Descriptors
The IKE Security Descriptor bundles the security parameters used for the IKE
Security Association (Phase1).
A number of IKE Security Descriptors are pre-configured in the SpeedTouch™, and
can be selected from a list. Select a Security Descriptor in compliance with the IKE
security parameters configured in the remote Security Gateway.
Click ... To ...
Use Preshared Key Authentication Reveal additional parameter fields
required for the configuration of
Preshared Key Authentication.
Use Certificate Authentication Reveal additional parameter fields
required for the configuration of
Certificate Authentication.
Specify Additional Descriptors Reveal additional fields where you can
specify alternative IKE Security
Descriptors.
Apply Confirm the IKE Authentication, IKE
Security Descriptors and Miscellaneous
parameters and reveal additional
parameters to complete the remote
Security Gateway profile.
The contents of the IKE Security Descriptors can be verified via
Advanced > Peers > Security Descriptors.