Nortel Networks 608(WL) - Manual (Page 126)

Chapter 4
Configuration via the Command Line Interface
E-DOC-CTC-20051017-0169 v0.1 124
4.4.3 Create a new peer entity
add command A new Peer is created with the ipsec peer add command.
Example In the following example, a new peer is created, named peer1
The result of this operation can be verified with the list command.
For the newly created peer in this example, all parameters are unset. Setting of the
parameters is described in the next section.
=>IPSec
[ipsec]=>peer
[ipsec peer]=>add
name = peer1
:IPSec peer add name=peer1
[ipsec peer]=>
[ipsec]=>peer
[ipsec peer]=>list
[peer1]
Remote Address : <unset>
Backup Remote Address: <unset>
Physical IF
: <unset>
Exchange Mode : <unset>
Local Identifier : <unset>
Remote Identifier : <unset>
Descriptors :
Authentication : <unset>
Client/Server : <unset>
Options : <unset>
[ipsec peer]=>