Server descriptor name, Virtual ip range, Netmask – Nortel Networks 608(WL) User Manual
Page 90: Push ip, Domain, Primary dns, For t, 6 vpn-server page, Chapter 3
Chapter 3
Configuration via Local Pages
E-DOC-CTC-20051017-0169 v0.1
88
3.5.6 VPN-Server Page
VPN-Server
page layout
The VPN-Server page allows you to define VPN Server Descriptors.
Server descriptor name
This name is used internally to identify the VPN Server Descriptor. This name
appears in the Client/Server list on the Peer Profiles page.
Virtual IP Range
Specifies the range of IP addresses from which the VPN client addresses are
selected. An address range or a subnet can be entered for this parameter.
Netmask
Specifies the netmask provided to the VPN client. Use the dotted decimal format.
For example: 255.255.255.0
Push IP
Select this check box when you want the VPN server to take the initiative for
assigning an IP address to the VPN clients via IKE Mode Config.
When the check box is not selected, the VPN clients will request an IP address from
the VPN server.
Domain
The domain name provided to the VPN clients via IKE Mode Config.
Primary DNS
The IP address of the primary DNS server, provided to the VPN clients via IKE Mode
Config. This is the primary DNS server in the local network that is open to VPN
clients.
The configuration of a VPN server scenario is described in detail in section
and following. The application-oriented VPN
Server Web page is the recommended way to configure a VPN server.