Nortel Networks 608(WL) - Manual (Page 165)

Chapter 5
Troubleshooting SpeedTouch™ IPSec
E-DOC-CTC-20051017-0169 v0.1 163
How to monitor the
IPSec negotiations
Proceed as follows:
1 Browse to Expert mode > VPN > Debug > Logging.
2 Select the desired level of Trace Detail. Select high to see the most detailed
level of logging.
3 Start the VPN connection.
4 Browse again to Expert mode > VPN > Debug > Logging.
On the Logging page you can monitor the received and transmitted messages of
the IKE and IPSec negotiations. This can help you to diagnose problems during the
establishment of VPN connections.The figure shows the start of the IKE
negotiations. You can scroll through the traces to search for the cause of an
eventual VPN connection establishment failure.
Click:
 Clear to clear the trace.
 Refresh to refresh the screen.