Nortel Networks 608(WL) - Manual (Page 67)

Chapter 3
Configuration via Local Pages
E-DOC-CTC-20051017-0169 v0.1 65
Buttons You can use one of the following buttons:
Local Trusted Network The Local Trusted Network open to Remote Clients describes which part of the local
network you want to make accessible for remote VPN clients. Two fields must be
completed: Trusted Network Type and Trusted Network IP. The Trusted Network
Type determines which type of value to use for the Trusted Network IP field.
The following network types are supported.
The Trusted Network IP values are used during the Phase 1 negotiations, and must
comply with the values configured in the remote VPN client.
Click ... To ...
Specify Additional Networks Reveal additional fields where you can
specify additional descriptors for the
local network open to remote terminals
via a VPN connection.
Use Preshared Key Authentication Reveal additional parameter fields
required for the configuration of
Preshared Key Authentication.
Use Certificate Authentication Reveal additional parameter fields
required for the configuration of
Certificate Authentication.
Specify Additional Descriptors Reveal additional fields where you can
specify alternative Security Descriptors.
Apply Confirm the VPN server settings.
Clear All Clear all VPN server settings.
Type IP
Valid network types are: Keyword: Examples:
a single IP address address 10.0.0.15
a single IP subnet subnet 10.0.0.0/24