Nortel Networks Passport ARN Routers - Manual (Page 111)

Using Local Boot (the Quick-Start Procedure)
114200-E Rev 00 B-5
Global Information Worksheet
This section contains the prompts and possible options relating to all ARN serial
configurations. Write your selection in the “Your Response” column.
Global Information Worksheet
Step Requested Information Options Your Response
1 Enter the module number [1]: The script lists the available
modules that you can use to
connect the router’s IP network
interface to Site Manager.
For example, the script might
offer the following options:
1. Token Ring on Base Module
2. Serial on Adapter Module 1
3. Ethernet Tri-Serial on
Expansion Module
Enter the number
that corresponds
to the module you
want to use.
2 Driver Type: If there is only one interface on
the module you chose, the script
automatically selects the driver
type for that interface and
bypasses this prompt. Otherwise,
the script displays a menu of
driver types. The actual menu
depends on the modules you
have installed. Choose the
Synchronous
driver.
(continued)