Nortel Networks Passport ARN Routers - Manual (Page 44)

Installing and Operating Passport ARN Routers
1-20 114200-E Rev 00
Connecting to the Integrated V.34 Modem
You connect dial services to the connector on an installed V.34 Modem adapter
module.
To connect a telephone cable to the integrated V.34 modem:
1. Connect the RJ-11 telephone cable to the V.34 modem interface
(Table 1-17) .
Figure 1-17. Connecting a Telephone Cable
2. Connect the other end of the cable to an analog telephone line.
Table 1-2 provides the default settings for the V.34 Modem adapter module.
Note: The default settings for the front-panel V.34 Modem adapter module
differ from the default settings for the back-panel V.34 Console Modem
module interface. For information about the back-panel V.34 Console Modem
and its default settings, see “Connecting a Console Modem” on
page 1-27 .
COM
Telco
Tx
Rx
RLSD
DTR
RLSD
Serial
V.34 Modem
Front-panel V.34 modem interface
ARN0071A
1
2
Tx
Rx
Cl
Tx
Rx
Cl
10BaseT
Ethernet 1
10BaseT
Ethernet 2
To
RJ-11 telephone
receptacle