Nortel Networks Passport ARN Routers - Manual (Page 112)

Installing and Operating Passport ARN Routers
B-6 114200-E Rev 00
Enter connector number [1]: If there is only one connector on
the module you chose, the script
automatically assigns a
connector number and bypasses
this prompt. Otherwise, the script
lists the available connectors. For
example, for an ARN with five
serial connectors, the options are
1. COM1
2. COM2
3. COM3
4. COM4
5. COM5
Enter clock source number [2]: 1. Internal
2. External
Enter clock speed number [10]: This prompt appears only if you
chose an Internal clock source.
The script lists a range of values,
with 64K as the default.
Enter circuit name [S#]: The script displays a default
circuit name for the COM
interface you selected (for
example, S11 for COM1 and S12
for COM2). Press the Return
key.
(continued)
Global Information Worksheet (continued)
Step Requested Information Options Your Response