Nortel Networks Passport ARN Routers - Manual (Page 59)

Starting the ARN
114200-E Rev 00 2-3
You may not be able to use all methods described in this chapter to boot over some
interfaces on your router. For example, you cannot netboot over an FT1/T1
interface. In some cases, you may use one interface to boot your router and then
switch to a different interface (such as the FT1/T1 DSU/CSU) to establish your
initial IP network connection to the management workstation.
Table 2-2 lists supported boot options by interface type.
Table 2-2. Supported Boot Options by Interface
Interface Supported Not Supported
Ethernet EZ-Install, Netboot, Directed
Netboot, Local boot
Token Ring EZ-Install, Netboot, Directed
Netboot, Local boot
Serial (synchronous) EZ-Install, Netboot, Directed
Netboot, Local boot
56K/64K DSU/CSU EZ-Install, Netboot, Directed
Netboot, Local boot
ISDN S/T (leased line) EZ-Install, Local boot Netboot, Directed Netboot
FT1/T1 DSU/CSU EZ-Install, Local boot Netboot, Directed Netboot
FE1/E1 DSU/CSU EZ-Install, Local boot Netboot, Directed Netboot
ISDN U (switched line) None All
V.34 modem None All