Nortel Networks Passport ARN Routers - Manual (Page 26)

Installing and Operating Passport ARN Routers
1-2 114200-E Rev 00
• Your installation site meets physical, electrical, and environmental
requirements.
• You have the communications devices and the cabling that you need to attach
to the ARN.
Verifying Shipment Contents
You should inspect all items for shipping damage. If you detect any damage, do
not install the ARN. Call the Nortel Networks Technical Solutions Center in your
area, as described in “How to Get Help.”
In addition to the ARN and this guide, your shipping container should contain
several other hardware accessory items. Verify that the items in the shipping
container match those on the packing list affixed to the shipping container.
Refer to the following checklist when verifying the contents of the shipping
container:
__ One power cable for connecting the ARN to a wall outlet.
__ One console/modem cable kit (Order No. 110310) for connecting an optional
local console or modem. The console/modem cable kit contains one 15-foot
AT standard molded serial cable (with DB-9 receptacle to DB-25 plug
connectors) and one null modem crossover adapter (with DB-25 to DB-25
receptacle connectors).
__ Two flange brackets, eight #6 Phillips screws, four #10 cagenut screws and
washers, and four cage nuts for rack-mounting the ARN.
___Four rubber feet for table-top operation.
Figure 1-1 illustrates the ARN hardware accessory items.