Connecting the power cable, Connecting the power cable -29 – Nortel Networks Passport ARN Routers User Manual

Page 53

Advertising
background image

Installing the ARN

114200-E Rev 00

1-29

Figure 1-24.

Connecting to an Integrated Console Modem

Connecting the Power Cable

To connect the power cable to the ARN, complete these steps:

1.

Connect the power cable to the power connector on the left side of the
ARN back panel

(Figure 1-25)

.

Danger:

Be sure that the power switch on the ARN back panel is in the OFF

(0) position before you connect the power cable.

ARN0072A

Console

Modem

To

RJ-11 telephone

receptacle

Back-panel V.34 Modem Interface

Modem

Tx

Rx

RLSD
DTR

Advertising