Nortel Networks Passport ARN Routers - Manual (Page 94)

Installing and Operating Passport ARN Routers
4-6 114200-E Rev 00
Installing an Adapter Module
To install a WAN adapter module:
1. Hold the adapter module with the components facing up (Figure 4-4) .
Figure 4-4. Adapter Module Ready for Installation
2. Slide the adapter module into the slot, making sure that the slot guides
engage both sides of the adapter module
(Figure 4-5) .
Figure 4-5. Inserting the Adapter Module
ARN0038A
Base module connector
ARN0032A