Nortel Networks Passport ARN Routers User Manual

Page 119

Advertising
background image

Using Local Boot (the Quick-Start Procedure)

114200-E Rev 00

B-13

Enter Remote Address
selection [3]:

1. DCE
2. DTE
3. EXPLICIT

Note: Reverse local and remote
address values when configuring
the device at the other end of the
circuit. (Exception: When
connecting to a Series 5 router
that uses DCE/DTE addressing,
use the SAME local address
value.)

Frame Relay Worksheet

Requested Information

Options

Your Response

Enter Management type [3]:

1. DLCMI None
2. Rev 1 LMI
3. ANSI T1 617D
4. CCITT Annex A
5. LMI Switch
6. Annex D Switch
7. Annex A Switch

Enter addressing type [4]:

1. ADDR Q.921
2. ADDR Q.922 (MARCH ’90)
3. ADDR Q.922 (NOVEMBER

’90)

4. ADDR Q.922

Enter address field length [2]:

2. Two Bytes
3. Three Bytes
4. Four Bytes

Enter DLCI number [30]:

(For DLCMI None, LMI Switch, Annex
D Switch, and Annex A Switch only)

Enter the permanent virtual
channel (PVC) number.

Note: The valid range for the DLCI
number is between 16 and 1007.

Nortel Networks Proprietary PPP Worksheet

(continued)

Requested Information

Options

Your Response

Advertising