Registerlevel programming, Figure 1-1. the relationship between the programmi, Register-level programming -6 – National Instruments AT-MIO-16X User Manual
Page 21: Figure 1-1, Register-level programming
Chapter 1
Introduction
AT-MIO-16X User Manual
1-6
© National Instruments Corporation
Figure 1-1. The Relationship between the Programming Environment,
NI-DAQ, and Your Hardware
Register-Level Programming
The final option for programming any National Instruments DAQ
hardware is to write register-level software. Writing register-level
programming software can be very time-consuming and inefficient,
and is not recommended for most users.
Even if you are an experienced register-level programmer, using
NI-DAQ or application software to program your National Instruments
DAQ hardware is easier than, and as flexible as, register-level
programming, and can save weeks of development time.
ComponentWorks,
LabVIEW,
LabWindows/CVI, or
VirtualBench
Conventional
Programming Environment
NI-DAQ
Driver Software
DAQ or
SCXI Hardware
Personal
Computer or
Workstation