National Instruments AT-MIO-16X User Manual

Page 321

Advertising
background image

Index

AT-MIO-16X User Manual

I-12

© National Instruments Corporation

F

fax and telephone support, D-2
Fax-on-Demand support, D-2
field wiring considerations, 2-42 to 2-43
FIFO. See ADC FIFO Register; DAC FIFO.
FIFO/DAC bit, 4-24
floating signal sources

description, 2-21
differential connections, 2-24 to 2-26
recommended configuration (table), 2-22
single-ended connections (RSE

configuration), 2-27

FOUT signal

Am9513A programmable frequency

output channel, 3-29

description (table), 2-19, B-6
RTSI switch connections, 3-30
timing signal source, 5-37

frequency measurements, 2-39
FTP support, D-1
functional overview. See theory of operation.
fuses and fusing

fusing of +5 V pin (table), 2-17, B-5
location of fuses (figure), 2-1, 2-2
power connections, 2-32

G

gain error

analog input circuitry, A-3
analog output circuitry, A-7

GATE, OUT, and SOURCE timing signals

counter signal connections, 2-37 to 2-42
RTSI bus interface circuitry, 3-30
timing I/O circuitry, 3-27 to 3-29

GATE1 signal

description (table), 2-18, B-5
RTSI switch connections (table), 5-38

GATE2 signal (table), 2-18, B-6
GATE2SEL bit

description, 4-24
pulsed cyclic waveform generation, 5-30

GATE5 signal (table), 2-18, B-6
General Event Strobe Register Group,

4-57 to 4-63

Calibration DAC 0 Load Register, 4-62
Calibration DAC 1 Load Register, 4-63
DMA Channel Clear Register, 4-58
DMATCA Clear Register

clearing analog output circuitry, 5-32
description, 4-59
interrupt programming, 5-43
programming DMA operations, 5-41

DMATCB Clear Register

clearing analog output circuitry, 5-32
description, 4-60
interrupt programming, 5-43
programming DMA operations, 5-41

External Strobe Register, 4-61
register map, 4-2

general-purpose timing signals. See counter

signal connections.

ground-referenced signal sources

description, 2-21
differential connections, 2-23
recommended configuration (table), 2-22
single-ended connections (NRSE

configuration), 2-28

H

hardware

installing, 2-13
resetting after data acquisition operation,

5-22 to 5-24

Advertising