National Instruments NI-FBUS - Manual (Page 100)

© National Instruments Corporation A-1 NI-FBUS Configurator User Manual
A
Error Messages and Warnings
This appendix lists error messages you might receive while using the
NI-FBUS Configurator and describes the error messages.
Error Messages
If you receive an error message while using the NI-FBUS Configurator,
refer to this section for a description of the error and possible solutions.
NIF_ERR_ALARM_ACKNOWLEDGED
The alarm has already been acknowledged.
NIF_ERR_BAD_ARGUMENT
The value you gave is not of the correct data type.
NIF_ERR_BAD_DEVICE_DATA
The device returned inconsistent information.
NIF_ERR_BUF_TOO_SMALL
The buffer does not contain enough entries to hold all the information for
the blocks. If you receive this error, buffer entries that you allocated did not
contain valid block information when the call returned.
NIF_ERR_COMM_ERROR
An error occurred when NI-FBUS tried to communicate with the device.
NIF_ERR_CONFIG_ERROR
Some configuration information, such as Windows registry information or
network configuration information, is incorrect.
NIF_ERR_DATA_NEVER_WRITABLE
The specified object is read-only.