National Instruments NI-FBUS - Manual (Page 23)

Chapter 1 NI-FBUS Configurator Overview
© National Instruments Corporation 1-11 NI-FBUS Configurator User Manual
information, refer to the Categorizing Block Parameters section of
Chapter 2, Using the NI-FBUS Configurator .
Note When you customize a tab of the block configuration window, that customization
applies to all blocks of the same type, even in other projects.
Block Configuration Window Units
Some information in the block configuration window is presented in time,
however units are not explicitly shown. The units are 1/32 of a millisecond.
For example, if
Execution Time is listed as 736, you should divide
736 by 32 to get the execution time of 23.8 milliseconds.