National Instruments NI-FBUS - Manual (Page 75)

Chapter 4 Parameters
NI-FBUS Configurator User Manual 4-10 ni.com
Tuning Parameters
Tuning parameters let you adjust the control settings.
Parameter Descriptions
ACK_OPTION (Alarming)
Allows alarms to be automatically acknowledged by the block with no
outside intervention. This is useful if you are not interested in
acknowledging certain alarms from a block.
MIN_CYCLE_T SP_D
MODE_BLK TEST_RW
OUT XD_STATE
OUT_D —
Table 4-9. Tuning Parameters
BAL_TIME IN_1
BIAS LOW_CUT
BYPASS OUT
CYCLE_SEL PV
CYCLE_TYPE PV_FTIME
FF_GAIN RA_FTIME
FF_VAL RATE
FIELD_VAL READBACK
FIELD_VAL_D READBACK_D
GAIN RESET
IN SEL_1 through SEL_3
Table 4-8. Process Parameters (Continued)