National Instruments NI-FBUS - Manual (Page 74)

Chapter 4 Parameters
© National Instruments Corporation 4-9 NI-FBUS Configurator User Manual
Parameters That Must Be Initialized
Some parameters must be initialized to a legal value before the
configuration can be downloaded without errors. This is because some
parameters are considered too important to allow a user to overlook
them.You must enter a legal value for these parameters.
ALERT_KEY
L_TYPE
Process Parameters
IO_OPTS STATUS_OPTS
LOW_CUT WRITE_LOCK
RESTART WRITE_PRI
Table 4-8. Process Parameters
BKCAL_IN OUT_STATE
BKCAL_OUT PV
BKCAL_OUT_D PV_D
CAS_IN PV_STATE
CAS_IN_D RCAS_IN
CHANNEL RCAS_IN_D
FF_VAL RCAS_OUT
FIELD_VAL RCAS_OUT_D
FIELD_VAL_D ROUT_IN
FREE_SPACE ROUT_OUT
FREE_TIME RS_STATE
HARD_TYPES SEL_1 through SEL_3
IN SEL_TYPE
IN_1 SP
Table 4-7. Option Parameters (Continued)