Key operator tools – Ricoh 1075 User Manual

Page 104

Advertising
background image

User Tools (System Settings)

90

5

Key Operator Tools

The key operator must set the following items. For settings or more information,
contact the key operator.

❖

❖

❖

❖ User Code Management

Allows you to control who uses the machine by setting codes for users.
User codes must be registered for user code management.

⇒ p.96 “User

Codes”.

Note

❒ Default settings: Copier/OFF, Document Server/OFF, Printer/Auto Program,

Scanner/OFF

❒ By using “Auto Program” for the printer, you can keep a print log for each

user code entered from the driver.

❖

❖

❖

❖ Key Counter Management

Use the key counter to specify whether users are limited or not.

Note

❒ Default settings: Copier/OFF, Document Server/OFF, Printer/OFF, Scan-

ner/OFF

❖

❖

❖

❖ Key Operator Code

This specifies whether or not to use passwords (max. 8-digits) to control use
of the “Key Operator Tools” settings for the key operator code.

Note

❒ Default setting: OFF
❒ If you select “ON”, enter the key operator code (max. 8-digits) using the

number keys, and then select “Partial” or “All Initial Settings” to set the ac-
cess limit.
• If you selected “Partial”

An access code is only required for the “Timer Setting”, “Key Operator
T o o l s ” i n i t i a l s e t t i n g s . “M E N U P R O T E C T ” w i l l b e s e t f o r
“CHANGE/CONTROL” in the printer initial settings. If you set
“MENU PROTECT”, you can set the key operator code in a part of the
printer initial settings.

⇒ “Printer Features Parameters” in the Printer

Reference 2

• If you selected “All Initial Settings”

An access code will be required to access all the items in the System Set-
tings, Copier/Document Server Features, Printer Features, and Scanner
Features.

❒ If you set the key operator code, you will need to enter it to access the Key

Operator Code screen.

MartiniC1_GBzen2_FM.book Page 90 Friday, April 19, 2002 2:18 PM

Advertising
This manual is related to the following products: