Ricoh 1075 User Manual
Page 36
Basics
22
2
6.
Operation switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).
⇒ p.32 “Turning On
the Power”
7.
Control panel
⇒ p.24 “Control Panel”
8.
Front cover
Open to access the inside of the machine.
9.
Paper tray (tray 1-3)
Load paper here.
1.
Ventilation holes
Prevent overheating. Do not obstruct the
ventilation holes by placing an object
near it or leaning things against it. If the
machine overheats, a fault might occur.
2.
Bypass tray
Use when copying onto OHP transparen-
cies, label paper (adhesive labels), trans-
l u c e n t p a p e r , p o s t c a r d s a n d n o n -
standard size paper.
3.
Interface for network connections
⇒ p.27 “Connecting the Machine (Net-
work Connections)”
MartiniC1_GBzen2_FM.book Page 22 Friday, April 19, 2002 2:18 PM