Ricoh 1075 - Manual (Page 83)

69
5. User Tools (System Settings)
User Tools Menu (System Settings)
$ These items must be set to use the function. Be sure to set them before using
the corresponding function.
❍ These items must be set if required.
❖ ❖ ❖ ❖ General Features ⇒ ⇒ ⇒ ⇒ p.75 “General Features”
*1 The default tray switches to “Finisher Upper Tray” if the optional finisher is in-
stalled.
*2 The default tray switches to “Mailbox Tray” if the optional mailbox is installed.
❖ ❖ ❖ ❖ Tray Paper Settings ⇒ ⇒ ⇒ ⇒ p.79 “Tray Paper Settings”
Default settings Copier/Docu-
ment Server
Printer Scanner
Panel Tone ON ❍ ❍ ❍
Warm Up Notice ON ❍
Copy Count
Display Up ❍
Function Priority Copier ❍ ❍ ❍
Print Priority Display mode ❍ ❍
Function Reset
Timer 3 seconds ❍ ❍
Interleave Print 10 sheet(s)
Output Tray
Setting According to
Function Setting ❍
Output: Copier Copy Tray *1 ❍
Output: Docu-
ment Server Copy Tray *1
Output: Printer Copy Tray *1 *2 ❍
ADF Original
Table Elevation When original is
set ❍
Job List Display
Time 15 seconds
❍
Default settings Copier Printer Scanner
Paper Tray
Priority: Copier Tray 1 ❍
Paper Tray
Priority: Printer Tray 1 ❍
MartiniC1_GBzen2_FM.book Page 69 Friday, April 19, 2002 2:18 PM