Ricoh 1075 - Manual (Page 39)

Control Panel
25
2
11. Main power indicator and On
indicator
The main power indicator lights up when
the main power switch is turned on.
The On indicator lights up when the
power is turned on.
Important
❒ Do not turn off the power while
the On indicator is blinking. Doing
so may damage the hard disk.
12. Operation switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).
13. {{{{Sample Copy}}}} key
Press to make a single set of copies or
prints to check for poor copying or print-
ing before making multiple sets.
14. {{{{Start}}}} key
Press to start copying, scanning, or print-
ing documents stored on the Document
Server.
15. {{{{Clear/Stop}}}} key
• Clear
Press to delete a number entered.
• Stop
Press to stop a job such as scanning
originals, or printing in progress.
16. {{{{#}}}} key
Press to enter a value.
17. Number keys
Use to enter the desired number of cop-
ies.
18. Function keys
Press to select the following functions:
• Copy
• Document Server
• Printer
• Scanner
19. Function Status indicator
These show the status of the above func-
tions:
• Yellow: the function is selected.
• Green: the function is active.
• Red: the function has been interrupt-
ed.
MartiniC1_GBzen2_FM.book Page 25 Friday, April 19, 2002 2:18 PM