Ricoh 1075 - Manual (Page 91)

Settings You Can Change with User Tools
77
5
• Change Output Tray
You can set the timing for switching the output tray, when the “Output
Tray” has been set to “Auto Change”, from “When Tray is Full” or “Per
Job”.
Note
❒ Default setting: When Tray is Full
❖ ❖ ❖ ❖ Output: Copier
You can specify a tray to which documents are delivered.
Note
❒ Default setting: Copy Tray, Finisher Upper Tray
❒ The default settings of the tray set as output tray may vary depending on
the installed optional finisher.
❖ ❖ ❖ ❖ Output: Document Server
You can specify a tray to which documents are delivered.
Note
❒ Default setting: Copy Tray, Finisher Upper Tray
❒ For details about output trays, see p.77 “Output: Copier”.
❒ The default settings of the output tray may vary depending on the in-
stalled optional finisher.
MartiniC1_GBzen2_FM.book Page 77 Friday, April 19, 2002 2:18 PM