Ricoh 1075 - Manual (Page 130)

Troubleshooting
116
6
B B B B Loading Paper
Note
❒ You can change the paper size in
tray 2 and 3.
⇒ p.132 “Changing
the Paper Size”
Reference
For details about paper types and
sizes, see p.177 “Copy Paper”.
Loading Paper in Tray 1
(Tandem Tray)
Important
❒ When paper on the right side in
tray 1 runs out, paper on the left
will automatically move to the
right. While the paper is moving,
the machine instructs you to wait.
At this time, do not pull out the
tray.
Note
❒ You can load paper even while
making copies using paper in tray
1. During copying, you can pull
out the left half of the tray.
AAAA
Pull out the paper tray until it
stops.
BBBB
Square the paper, and then load it
in the tray.
When the whole tray is pulled out
A Load the paper.
Important
❒ Align the right edge of the
right copy paper stack to the
right edge of the tray, or the
left edge of the left copy pa-
per stack to the left edge of
the tray.
When the left half of the tray is
pulled out
A Load the paper in the left tray.
MartiniC1_GBzen2_FM.book Page 116 Friday, April 19, 2002 2:18 PM