Ricoh 1075 - Manual (Page 44)

Basics
30
2
Connecting the Network Cable to the Network
Limitation
❒ The IEEE 1394 Interface Board (option), the Wireless LAN Board (option) or
USB 2.0 Interface Board (option) cannot be installed at the same time.
Note
❒ Connect the machine to the computer. Set the network connection settings,
and then install any necessary software such as printer drivers. For details,
see the Printer Reference 1.
Connecting to the Ethernet Interface
Note
❒ Rating voltage of the interface connector: Max. DC 5V
AAAA
Turn off the main power switch.
BBBB
Attach the Ethernet interface cable to the 10BASE-T/100BASE-TX port.
CCCC
Turn on the main power switch.
❖ ❖ ❖ ❖ Indicators on Network Interface Board
1. Indicator (green)
Remains green when the machine
is connected to the network cor-
rectly.
2. Indicator (yellow)
Turns yellow when 100 BASE-TX is
operating.
Turns off when 10 BASE-T is oper-
ating.
MartiniC1_GBzen2_FM.book Page 30 Friday, April 19, 2002 2:18 PM