Tray paper settings – Ricoh 1075 User Manual
Page 93
Settings You Can Change with User Tools
79
5
Output tray settings
Limitation
❒ You cannot interrupt the current stapling job even when a stapling job is spec-
ified with a different function.
❒ When the Booklet Finisher, Finisher 3000M (50-Sheet Staples) or Finisher
3000B (100-Sheet Staples) is installed and stapling or shift-sorting is specified,
the job will be delivered to the finisher shift tray regardless of the output tray
specified.
Tray Paper Settings
❖
❖
❖
❖ Paper Tray Priority:Copier (Copier/Document Server)
You can specify the paper tray for delivery.
Note
❒ Default setting: Tray 1
❖
❖
❖
❖ Paper Tray Priority:Printer (Printer)
You can specify the paper tray for delivery.
Note
❒ Default setting: Tray 1, LCT
❒ The default tray switches to “LCT” if the optional large capacity tray (LCT)
is installed.
❖
❖
❖
❖ Tray Paper Size: (Tray 2,3)
Select the size of the copy paper loaded in the paper tray.
• The paper sizes you can load for trays, when the paper size selector knob
is set to the
p mark, are as follows:
• A3
L, B4L, A4K, A4L, B5K, B5L, A5K, A5L, 210 × 340 mmL, 210
× 182 mmK, 210 × 170 mmK
• 11"
×17"L, 8
1
/
2
"
×14"L, 8
1
/
2
"
×13"L, 8
1
/
2
"
×11"K, 8
1
/
2
"
×11"L, 8
1
/
4
"
×13"L,
8"
×13"L, 7
1
/
4
"
×10
1
/
2
"
L, 5
1
/
2
"
×8
1
/
2
"
K, 5
1
/
2
"
×8
1
/
2
"
L, 11"×15"L,
11"
×14"L, 10"×15"L, 8
1
/
4
"
×14"L, 8"×10
1
/
2
"
L, custom size (139.7-297
mm(5.5"-11.7") wide
× 139.7-431.8 mm(5.5"-17") long)
• 8K(267
× 390 mm)L, 16K(195 × 267 mm)KL
Important
❒ If the specified paper size differs from the size of paper actually set in the
paper tray, a paper misfeed might occur because the paper size is not de-
tected correctly.
MartiniC1_GBzen2_FM.book Page 79 Friday, April 19, 2002 2:18 PM