Access to the machine – Ricoh 1075 User Manual
Page 167
Where to Put Your Machine
153
7
• When the main power switch is in the Stand-by position, the optional anti-
condensation heaters are on. In case of emergency, unplug the machine's
power cord.
• When you unplug the power cord, the anti-condensation heaters turn off.
• Make sure that the plug is firmly inserted in the outlet.
• Voltage must not fluctuate more than 10%.
• The socket-outlet should be installed near the equipment and should be easily
accessible.
Access to the Machine
Place the machine near the power source, providing clearance as shown.
1.
Rear: more than 5 cm (2")
2.
Right: more than 4 cm (1.6")
3.
Front: more than 70 cm (27.5")
4.
Left: more than 5 cm (2")
Note
❒ For required space when options are installed, contact your service represent-
ative.
MartiniC1_GBzen2_FM.book Page 153 Friday, April 19, 2002 2:18 PM