Ricoh 1075 - Manual (Page 97)

Settings You Can Change with User Tools
83
5
❖ ❖ ❖ ❖ Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or the last operation is performed.
Note
❒ Default setting: 1 minutes
❒ The warm up time for making a copy from standby mode is 0 seconds.
❒ The interval time can be set from 10 seconds to 240 minutes using the
number keys.
❖ ❖ ❖ ❖ System Auto Reset Timer
The System Reset setting automatically switches to the screen of the function
set in Function Priority. This happens if no operations are performed or when
an interrupted job is cleared. This setting sets the system reset interval.
⇒ p.75
“Function Priority”
Note
❒ Default setting: 60 seconds
❒ The time can be set from 10 to 999 seconds in one second increments using
the number keys.
❖ ❖ ❖ ❖ Copier/Document Server Auto Reset Timer (Copier/Document Server)
Specifies the time to elapse before copier and Document Server functions are
reset.
Note
❒ Default setting: 60 seconds
❒ If “OFF” is selected, the machine will not automatically switch to the user
code entry screen, and you will not be able to limit who uses the machine.
❒ The time can be set from 10 to 999 seconds in one second increments using
the number keys.
❖ ❖ ❖ ❖ Scanner Auto Reset Timer (Scanner)
Specifies the time to elapse before the scanner function is reset.
Note
❒ Default setting: 60 seconds
❒ If “OFF” is selected, the machine will not automatically switch to the user
code entry screen, and you will not be able to limit who uses the machine.
❒ The time can be set from 10 to 999 seconds in one second increments using
the number keys.
❖ ❖ ❖ ❖ Set Date
Set the date for the copier's internal clock using the number keys.
Note
❒ To change between year, month and day, press the [← ← ← ←] and [→ → → →] keys.
MartiniC1_GBzen2_FM.book Page 83 Friday, April 19, 2002 2:18 PM