Ricoh 1075 - Manual (Page 92)

User Tools (System Settings)
78
5
❖ ❖ ❖ ❖ Output: Printer
You can specify a tray to which documents are delivered.
Note
❒ Default setting: Copy Tray, Finisher Upper Tray
❒ The output trays set on the Printer Driver have priority over the output
tray specified above.
❒ The default settings of the output tray may vary depending on the in-
stalled optional finisher.
❖ ❖ ❖ ❖ ADF Original Table Elevation
You can set the timing for elevating the document feeder (ADF) original table.
Note
❒ Default setting: When original is set
❖ ❖ ❖ ❖ Job List Display Time
You can set the length of time the job list screen is displayed before returning
automatically to the default screen.
Note
❒ Default setting: 15 seconds
❒ When you select “On”, enter the time from 10 to 999 seconds in one second
increments using the number keys.
MartiniC1_GBzen2_FM.book Page 78 Friday, April 19, 2002 2:18 PM