User parameters, 7user parameters, Setting? y/h print list h – Ricoh H545 User Manual
Page 148
Technical Reference
132
7
User Parameters
Adjusting your machine sometimes requires that you change special settings
called user parameters. For each user parameter, you must change a bit in a
switch.
A switch has eight bits. Each bit has a value of 1 or 0, and each bit is numbered
0 to 7 from the right.
❖
❖
❖
❖ Bit values and Bit numbers
In the following example we'll change bit 3 of switch 05 in the user parameters.
A
Press the
{{{{Function}}}} {{{{6}}}} then enter the access code {{{{2}}}} {{{{2}}}} {{{{2}}}} {{{{2}}}}. Then
press
{{{{6}}}} {{{{3}}}} and the {{{{Yes}}}} key.
You'll get the display.
SETTING? Y/h
PRINT LIST h
Note
❒ You can press the
W key to see a list. Otherwise, press the {Yes} key.
B
Press the
{{{{Yes}}}} key again and use W
W
W
W and V
V
V
V to change switches.
Note
❒ For example go to switch 05 by pressing
V five times.
KPAD/Y/ hi
SWITCH 05 :1000 0001
C
To change bit 3, press
{{{{3}}}} on the ten key pad.
Bit 3 will change from 1 to 0 or from 0 to 1.
KPAD/Y/ hi
SWITCH 05 :1000 1001
Note
❒ To change bit 0, press
{0} to change bit 1, press {1} and so on.
D
Press the
{{{{Yes}}}} and {{{{Function}}}} keys.
Bit value
0
1
0
0
0
0
0
0
Bit number
↓
↓
↓
↓
↓
↓
↓
↓
7
6
5
4
3
2
1
0