Report formats – Ricoh H545 User Manual

Page 58

Advertising
background image

Other Features

42

4

communication failure report is
printed after a job has been com-
pleted. And at the end, it prints a
communication failure or trans-
mission result report. Check it, and
retransmit any pages that were not
sent. If a particular problem con-
tinues or gets worse, keep the error
reports for the service technician.

Polling Result Report

This report is printed after your
machine polls a message from an-
other machine.

Printing Part of the Image on the Re-

port (Switch 04, bit 7)

For reference purposes, the ma-
chine prints the first few inches of
the fax message on the following
reports.
• Communication Result
• File Reserve
• Communication Failure Report

Report formats

The Mode Column

See the bottom of the Journal for a full listing of symbols on the Journal. On
other reports a code is given, informing the type of communication. These
codes are explained below.

The Result Column

OK: Successful communication
E: An error occurred

* * * COMMUNICATION RESULT REPORT (NOV.24.1998 9:19PM) * * *

TTI XYZ COMPANY

FILE MODE

OPTION

ADDRESS (GROUP)

RESULT PAGE

* * * JOURNAL(NOV.24.1998 11:07PM) * * *

TTI XYZ COMPANY

<RX>

DATE TIME

ADDRESS MODE TIME PAGE RESULT PERS.NAME FILE

<TX>

DATE TIME

ADDRESS MODE TIME PAGE RESULT PERS.NAME FILE

GFLIST0N

Advertising