Ricoh H545 - Manual (Page 30)

Faxing
14
3
after you dial the number and
go to step
G.
D
The display will look like this:
TRANSMIT OPTIONi
DIAL FAX NUMBER
E
If the memory indicator is not lit,
press the
{{{{Memory}}}} key.
F
Dial the number in one of the fol-
lowing ways.
TRANSMIT Y/START
5551234kkkkkkkkkkkkk
*1 In this example Group Dial is pro-
grammed in Quick Dial 08.
*2 In this example Quick Dial key 30
is programmed as the Group key,
and Group dial number 1 is pro-
grammed.
Note
❒ If you install the handset or an
external telephone, you can
send the message manually.
Pick up the handset and dial.
❒ If you want to erase a digit of
the phone number, press the
{Clear} key. If you want to erase
the entire number, press the
{No} key.
❒ The maximum destinations you
can dial using the ten key pad is
49. However, this limitation is
also subject to memory capaci-
ty.
Reference
Programming Quick Dial: see
P.25 “Storing & Editing Fax
Numbers (Functions 31 & 32)”.
Programming Speed Dial: see
P.25 “Storing & Editing Fax
Numbers (Functions 31 & 32)”.
Programming Group Dial:
seeP.28
“Storing & Editing A
Group Of Fax Numbers (Function
33)”.
Programming Group key: see
P.29 “Programming The Group
Key”.
G
Press the
{{{{Yes}}}} key to enter an-
other number.
TRANSMIT DIAL/START
DIAL NEXT FAX NUMBER
Note
❒ Repeat steps F and G until all
destinations are entered.
❒ If you have only one destina-
tion, press the
{Start} key.
❒ The machine stores your mes-
sage and dials the first number
(or, if you selected Send Later, it
will return to standby mode and
the fax message will be sent at
the time that you selected).
Ten Key Pad Quick Dial
Speed Dial Group
Example:
Method *1 Quick
Dial key 08.
Method *2 Quick
Dial key 30 and 1
on the ten key pad.
1 2 3
4 5 6
7 9
*
GFDIAL0N
07 06
GFDIAL1N
Speed Dial
1 0
Example: Speed Dial 10
GFDIAL2N