Toshiba VF010H05 - Manual (Page 72)

JKSSS+ Series - 66
JKSSS+ Series 2.3 - 4.2KV
SP.11 Communications (Setpoint Page 11)
(Security Level: 3)
SP11.1 Set Front Baud Rate: Configures the RS232
communications baud rate.
SP11.2 Set Modbus Baud Rate: Configures the
Modbus communications baud rate.
SP11.3 Modbus Address Number: Assigns a Modbus
address to the soft starter relay.
SP11.4 Set Access Code: Assigns an access code to
the Modbus addressing. This is typically not
used.
SP11.5 Set Link Baud Rate: Configures the RS422
communications baud rate between the keypad
operator and the CPU board. (For applications
with remote keypad only.)
SP11.6 Remote Start/Stop: Allows the RS485 Modbus
communications to start and stop the motor.
Contact factory for details.
MENU
PAGE 11
COMMUNICATIONS
SET FRONT BAUD
RATE: 9.6 KB/SEC
(Hit DOWN ARROW ten times)
Range: 2.4, 4.8, 9.6, 19.2
38.4 KB/SEC
SET MODBUS BAUD
RATE: 9.6 KB/SEC
MODBUS ADDRESS
NUMBER: 247
SET ACCESS CODE
CODE: 1
Range: 2.4, 4.8, 9.6, 19.2
38.4 KB/SEC
Range: 1 - 247
Increments of 1
Range: 1 - 999
Increments of 1
SET LINK BAUD
RATE: 38.4 KB/SEC
Range: 2.4, 4.8, 9.6, 19.2
38.4 KB/SEC
REMOTE START/STOP:
DISABLED
Option: Enabled or Disabled