Chapter 6 - metering pages, Jksss+ series 2.3 - 4.2kv, 1 metering page list – Toshiba VF010H05 User Manual
Page 76
JKSSS+ Series - 70
JKSSS+ Series
2.3 - 4.2KV
6.1 Metering Page List
The following charts list each Metering Page and the functions within that page. The
applicable section of the manual is also referenced.
6.1.1 Metering Menu & Data (Metering Page 1)
Chapter 6 - Metering Pages
The soft starter offers performance metering which gives the user the ability to view
information about the motor and the JKSSS+ unit.
6.1.2 Metering (Metering Page 2)
6
.1.3 RTD Values (Metering Page 3)
Metering
Page
Description of Display
Screen
Phase A, B, C and Ground Fault (Option)
1
Average current of the % of imbalance and the motor's RPM
2
Motor load as a percentage of motor FLA
3
Line frequency and present phase sequence
4
Percentage of remaining Thermal Register
5
Thermal capacity required to start the motor
6
Average time required to start
7
Average current during start
8
Measured I
2
T required to start the motor
9
Amount of time required to start the motor during the last successful start
10
Page
1
Metering Menu & Dat
a
Metering
Page
Description of Display
Screen
Phase A, B, C currents and Power Factor
1
Phase A, B, C currents and Ground Fault (Option)
2
Displays kW and kVA
3
Displays kVAR and Power Factor
4
Displays Peak ON and kW Demand
5
Displays Peak ON and kVA Demand
6
Displays Peak ON and kVAR Demand
7
Displays Peak ON and Amps Demand
8
Clears Demand values
9
Displays Megawatt hours used
10
Press enter to clear statistics on MWH values
11
Page
2
Meterin
g
Metering
Page
Description of Display
Screen
Hottest stator RTD (#1 - 6)
1
Hottest non-stator RTD (#7 - 12)
2
Temperature of start phase A1 in °C and °F
3
Maximum temperature for RTD #1
4
Same as Screens 3 - 4 for RTDs #2 - 12
5 - 26
Clear the maximum temperature register (Level 3 password required)
27
Measured running thermal stabilization time of motor (in minutes)
28
Measured stopped cooling time (to ambient) of motor (in minutes)
29
Page
3
RTD Values