Toshiba RAS-10SAX User Manual

Page 17

Advertising
background image

– 17 –

7-7-2. How to Cancel the Auto Restart

To cancel the Auto Restart function, proceed as

follows:

R e p e a t t h e s e t t i n g p r o c e d u r e : t h e u n i t w i l l

acknowledge the instruction and bleep three times.

The system will now be required to manually restart

with the remote control after the main supply is turned

off.

Cancellation is carried out:

• When the system is stand-by (not running)

OPERATION

Press the TEMPORARY button
continuously more than three
seconds.

MOTION

Stand-by

The system starts to operate.

The orange light will be lit.

about three seconds after

The unit beeps three times.

The green light will be lit.

The system is operating.

If the system is not required to run at this time, press the TEMPORARY
button once more or use the remote control and the unit will stop.

• When the system is operating

OPERATION

Press the TEMPORARY button
continuously more than three
seconds.

MOTION

Operating

The orange light is lit.

The system stops to operate.

The orange light is turned off.

about three seconds after

The unit beeps three times.

The system stops.

If the system is not required to stop at this time, use the remote control
and to restart.

During subsequent operation, the green light is light-

ing.

7-7-3. In Case of Power Failure during the

Timer Operation

(1) If ON-TIMER operation is reserved with setting of

Auto Restart operation, it is cancelled with power

failure. (The OPERATION lamp on the main unit

goes on and off to inform of power failure.) In that

case, try to reserve ON-TIMER operation once

again.

TEMPORARY

0

3S

TEMPORARY

0

3S

(2) If OFF-TIMER operation is reserved without

setting of Auto Restart operation, the reservation

is cancelled with power failure. (The OPERATION

lamp on the main unit goes on and off to inform of

power failure.) In that case, try to reserve OFF-

TIMER operation. When Auto Restart operation

is set, OFF-TIMER reservation is also cancelled

with power failure.

Advertising
This manual is related to the following products: