Toshiba RAS-10SAX - Manual (Page 50)

– 50 –
Procedure
1) Turn the power supply off to stop the operation of
air-conditioner, and disconnect the power cord from
the AC supply.
2) Remove the front panel.
• Remove the two fixing screws. (
φ
4 x 14 )
3) Remove the electrical part base.
1) Perform the process

above.
2) Remove terminal cover (Up), (Down).
3) Disconnect the terminal blocks connected with the
connecting cable, and the power cord from base E-
parts by removing the screws.
4) Remove the thermal fuse (77°C) from base E-parts.
10-2. Microcomputer (RAS-10SK-E, RAS-10SKX)
No.

‚
Remarks
Replace the thermal fuse, terminal
block, power cord, microcomputer
ass’y and the power supply PC
board ass’y.
Part name
Common
procedure
Thermal fuse
replacement