Universal Laser Systems X2-600 - Manual (Page 12)

1-6 Safety
EU Compliance (CE)
Product Identification: X-600 and X2-600
Laser Engraving and Cutting Systems
Manufacturer:
Universal Laser Systems, Inc.
16008 N. 81
st St.
Scottsdale, AZ 85260
Phone: (480) 483-1214 Fax: (480) 483-5620
USA
This equipment Is manufactured in conformity with the following directives:
89/336/EEC (EMC Directive)
73/23/EEC (Low Voltage Directive)
89/392/EEC (Machinery Directive)
based on the standards listed.
Standards Used:
Safety:
EN 60950: 1995
EN 60825: 1994 (Class IIIa)
EMC:
EN 55022: 1995 (Class A)
EN 50082-1: 1992
EN 60801-2: 1993 (6kV CD, 8kV AD)
EN 61000-3-2: 1996 (class A)
EN 61000-3-3: 1995
EN 61000-4-3: 1997 (3 V/m)
EN 61000-4-4: 1995 (2 kV power line, 0.5 kV signal line)
EN 61000-4-5: 1996 (class 2)
Note: This is not a declaration of conformity. The importer of this equipment
supplies the declaration of conformity.
Warning -
This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.
L A S E R S Y S T E M S I N C.