Universal Laser Systems X2-600 - Manual (Page 61)

5-6 Options & Accessories
The Rotary Fixture is placed on the engraving table as the following diagram illustrates.
Please refer to the instructions supplied with the Rotary Fixture on how to properly install and use this
option.
Cutting Table
The purpose of the Cutting Table is to support the material that you are cutting off of the engraving table’s
surface to minimize surface contact area. It also redirects exhaust airflow below and above the material
for better smoke removal. The Cutting Table is installed directly on top of the engraving table. It is
composed of a sheet metal box, alignment rulers, and a replaceable honeycomb style bed. The
honeycomb material is reflective only in the area that contacts your material to minimize laser beam
reflection.
Please refer to the instructions supplied with the Cutting Table on how to properly install and use this
option.