UTStarcom Handset - Manual (Page 12)

Safety Precautions
4
Handling the Charger
DANGER
Only use a power source that provides the appropriate
voltage (AC100~240 V) for the charger. An unsuitable
power source can result in damage to the charger,
electric shock or fire.
Do not use the charger if the power supply cord or plug is
damaged or frayed (exposed or broken wires, etc). This
can result in the risk of fire or electric shock.
Do not short circuit the charger connector jack. This may
result in fire or electric shock.
In the event that liquid is spilled into the unit, immediately
unplug the charger from the wall outlet to prevent fire or
electric shock.
CAUTION
To avoid the risk of electric shock, always unplug the
charger from the wall outlet before cleaning.
To avoid damage, do not place heavy objects on the
cord.
To avoid damage and the risk of electric shock, always
grip the power plug when removing the charger from the
wall outlet. Do not pull on the power supply cord.